Hanstar attended 2023 Dubai Airshow
Titanium alloy parts processing methods and precautions
Heat treatment process in the application of precision machining
Introduction to CNC precision machining common fatal problem points
Application of grinding machine in precision machining
Is kovar the same as Stainless Steel Material
Daily machining materials, the processing of titanium alloy parts when considered one of the more difficult to process one materials, the following we will share the titanium alloy parts processing methods and the need for attention,
There are a lot of people in the processing of titanium alloy, titanium alloy material properties are not understood, the processing method is not right, and processing tools are not applicable, ultimately leading to the processing of titanium alloy being difficult, inefficient and low quality, titanium alloy is a kind of high strength, corrosion resistance, heat resistance of a material, titanium alloy can be used to heat treatment for shaping and enhance the stability of the organization, so in the machining of titanium alloy parts, it should be a priority to Adopt inserts with positive angle geometry, which can reduce the cutting force and prevent the deformation of the workpiece caused by the heat generated by cutting. In terms of feeding, attention should be paid to controlling the feeding speed and maintaining constant feeding parameters, the radial draft should be 30% of the radius when iron cutting and high-pressure high-flow cutting fluid should be used to ensure thermal stability of the machining process and to prevent the denaturation of the workpiece surface and damage to the cutting tool due to the excessively high temperature, Machining titanium alloys in their softest state possible because the material becomes more difficult to machine after hardening, heat treatment increases the strength of the material and increases insert wear, use a large tip radius or chamfer cut to put as much of the cutting edge into the cut as possible. This reduces cutting forces and heat at each point and prevents localized breakage.
Machining titanium alloy should also pay attention to the processing of chip breakage treatment, and general processing of titanium alloy parts, tangled slag will lead to parts being scrapped, and damage to the machine, but also produce processing safety accidents.